Modules

BT88x Intelligent Display Module with 4.3” capacitive screen and on-board RP2040

The user interface (UI) is designed to control various smart home features, such as heating, lighting, air conditioning, and curtains. This demo emphasizes the GPU’s ability to deliver a fluid, responsive user experience on a small, budget-friendly platform.

The VM880C is a development module for BT880, which is used to develop and demonstrate the functionality of the BT880 Embedded Video Engine, EVE.

Intelligent 7” display module using the BT817 EVE display controller. The module has an 800 x 480 capacitive touch screen. It has an on-board Raspberry Pi RP2040 microcontroller.

BT817 module with SPI/DSPI/QSPI connector, with 50-pin RGB interface and 40-pin LVDS interface, no display.

BT816 Credit Card Development Module with on-board USB-SPI

BT816 Credit Card Development Module (display not included)

BT816 Credit Card Development Module with on-board USB-SPI

BT816 Credit Card Development Module (5” display included)

FT813 Development Module with 5.0 inch WVGA TFT LCD

FT812 Development Module with 5.0 inch 800*480 TFT LCD

FT812 Development Module with 5.0 inch 800*480 TFT LCD

FT810 Credit Card Development Module (5″ resistive touch display included)

FT810 Credit Card Development Module (display not included)

FT800 BASIC – display module with 3.5″ display and black bezel

FT800 Credit Card – Adapter board with 3.5″ display

FT800 Credit Card – Adapter board with 4.3″ display

FT800 Credit Card – Adapter board for 4.3”/5” display (no display included)

FT800 Basic – display module with 4.3″ display and black bezel

FT800 Basic – display module with 5″ display and black bezel

Class 6, 8GB branded Micro-SD card. It functions as an accessory for the CleO module and its capacity is 8GB.

The MM2040EV PICO Adapter board consists of a PICO module which acts as the main MCU to control a supported BRT EVE Module as well as the peripheral devices connected through the corresponding connectors.

The MM900EV LITE is a development module for Bridgetek 32-bit high performance FT90x Microcontroller family, which is used to develop and demonstrate the functionality of the FT900 Embedded Microcontroller.

The MM930Lite is a development module for Bridgetek’s 32-bit high performance FT93x Microcontroller family, which is used to develop and demonstrate the functionality of the FT930 Embedded Microcontroller.

The MM930Mini Module is a USB microcontroller development module in the Bridgetek product range. It utilizes the FT930Q bridge chip which can handle all USB signalling and protocols. It is ideal for development purposes to quickly prove functionality of adding USB to a target design.

The MM932LC is a low cost development module for Bridgetek’s 32-bit high performance FT93x Microcontroller family, which is used to develop and demonstrate the functionality of the FT932 Embedded Microcontroller. The module is ideal for simple applications including USB capability products, embedded multimedia applications and other industrial control systems.

The UMFPD2A debugger/programmer module provides a USB bridge between the FT90x Eclipse IDE development tools runnng on a PC and the FT900 1-wire debug pin. This module can be used to program, configure the EFUSE and debug firmware running on the FT900 device.

FT90x Development Module with rear-facing CMOS camera. Contains RevB silicon.

FT90x Development Module with no camera. Contains RevC silicon.

Flat USB A to Micro B Cable 1M – Back and White

Suited to the FT800’s VM800B and VM800C modules

Flat USB A to Micro B Cable 1M – Blue and White

Suited to the FT800’s VM800B and VM800C modules

Pen Stylus, Resistive Touch, VM800B Development Modules

Arduino UNO compatible design with long shield pin

CleO35 is a 3.5″ smart TFT display shield for Arduino (based on FT810 and FT903)

CleO50 is a 5″ smart TFT display shield for Arduino and MikroBUS (based on FT812 and FT900)