VI800A EVE Expansion Cards

An extensive range of expansion cards, designed to support the VM800P module, allowing EVE to connect to a wider system and become the focal point of the system control and display interface. With a simple Arduino SPI interface accessed over the VM800P Micro-MaTch connectors, access to Serial, Control and even Ethernet systems can be achieved.

VI800A-TTLU Serial Adapter

The VI800A-TTLU is a plug in accessory for the VM800P Plus module, which expands the IO capabilities of the VM800P to include a TTL level UART. This module behaves as a full SPI to UART bridge to the VM800P Plus module. The product provides speeds up to 921600 Baud, 5V tolerant I/O, GPIOs (4 input/4 output) and status LED.

VI800A-TTLU Datasheet
VI800A-TTLU Application Note
Arduino Library Sample App

VI800A-232U Serial Adapter

The VI800A-232U is a plug in accessory for the VM800P module, which expands the VM800P IO capabilities to include RS232. This module behaves as a full duplex SPI to RS232 bridge on the VM800P Plus module. The product provides speeds up to 921600 Baud, GPIO (4 input/4 output) and staus LED.

VI800A-232U Datasheet
VI800A-232U Application Note
Arduino Library Sample App

VI800A-N485U Serial Adapter

The VI800A-N485U is a plug in accessory for the VM800P Plus module, which is used to develop and extend the functionality of the FT800 Embedded Video Engine, EVE. This module behaves as a full duplex SPI to RS485 bridge on the VM800P Plus module. The product provides speeds up to 921600 Baud, GPIO (4 input/4 output) and staus LED.

VI800A-N485U Datasheet
VI800A-N485U Application Note
Arduino Library Sample App

VI800A-RELAY Control Adapter

The VI800A-RELAY is a plug in accessory for the VM800P Plus module, which is used to develop and extend the functionality of the FT800 Embedded Video Engine, EVE. This module behaves as an SPI to relay bridge for the VM800P Plus module. The product provides a control adapter with 4 Opto-isolated Input and 4 changeover relay output, and status LED.

VI800A-RELAY Datasheet
VI800A-RELAY Application Note
Arduino Library Sample App

VI800A-ETH Network Adapter

The VI800A-ETH is a plug in accessory for the VM800P Plus module, which is used to develop and extend the functionality of the FT800 Embedded Video Engine, EVE. This module behaves as a full duplex SPI to Ethernet bridge on the VM800P Plus module and contains 6 status LEDs.

VI800A-ETH Datasheet
VI800A-ETH Application Note

VI800A-POE Network Adapter

The VI800A-PoE is a plug in accessory for the VM800P Plus module, which is used to develop and extend the functionality of the FT800 Embedded Video Engine, EVE. This module behaves as a full duplex SPI to Ethernet bridge on the VM800P Plus module with the additional option of providing a 5V, 1.8A power pin derived from the Ethernet port.

VI800A-PoE Datasheet
VI800A-PoE Application Note